WT-250200 Oil Stabilizer 5in1

5in1 Oil Stabilizer is a product that is specially formulated to compensate for wear in old engines and gearboxes and also stop the wear process in new ones. This specially blended additive ensures that the oil in engines and gearboxes maintains a high degree of lubrication. It eliminates viscosity breakdown at high temperatures, even under the most extreme conditions, and extends the service life of the oil by 50%. Oil treated with 5in1 does not run off the cylinders after the engine has stopped. This eliminates dry starts which are the prime cause of wear in an otherwise well-maintained engine.

5in1 Oil Stabilizer is specially formulated with molybdenum to stop blow-by.
Blow-by occurs when the explosion in your engine’s combustion chamber causes fuel, air and moisture to be forced past the rings into the crankcase. Your engine’s rings must maintain an excellent fit in order to contain the pressure. Less blow-by means less contamination, less fuel dilution and more power. The detergents and molybdenum disulfide work together to clean the soot and deposits off your rings, thus enabling them to better seal the combustion chamber. The molybdenum fills the crevices in the cylinder walls, thus providing a better seal. Plain motor oil is formulated with the tolerance of new engines in mind. Once an engine becomes worn, the wearing process advances at a rapid rate because motor oil alone cannot fill the space between moving parts. 5in1 Oil Stabilizer is formulated for both new and old engines. 5in1 Oil Stabilizer has been developed to help worn engines to seal properly, thus cushioning the moving parts, reducing oil consumption, preventing further wear and also stopping most leaks from seals. It blends with all automotive lubricants (even synthetics), mineral oil and ATF. 5in1 Oil Stabilizer is typically used in cars, trucks, tractors and boats.

Results:

• Stops exhaust smoking
• Stops oil burning
• Increasing compression
• Reduces friction by lasting film strength
• Reduces piston slap-valve and lifter noise
• Increases oil pressure
• Increases gas mileage by stopping blow-by

Direction for use:
Have motor oil warm, then pour contents Into motor while idling, best results by using after oil change, then after each successive change. If motor is badly worn use two bottles.